|
|
|
Know the Required and Recommended Tools for each Job you Work
|
|
Updated On: Jul 11, 2007 (22:49:00)
|
|
|
|
Tools Required to bring to every Job
| Cresent Wrench |
Hammer |
Screwdriver |
| Side Cutters ("Dikes") |
Flashlight |
Pocket Knife |
| Pliers |
Tape Measure |
Pen or Pencil |
Extra Tools Recommended for certain departments
Audio/ Video/AV
|
| Sharpie |
Light colored Electrical Tape |
Multi-Meter |
| Speaker Tester |
Small Screwdriver ("Greeny") |
Hex Wrench Set |
| Multi-Tool (ie: "Leatherman" type) |
VGA Tester |
Q-Box |
Carpentry
|
| Battery-Powered Screw-Gun |
Hand Saw |
Level |
| Gloves |
Rachet/Socket Wrench Set |
|
Electrics
|
| Light Tester |
Speed Wrench |
Multi-Meter |
| Power Tester ("Wiggy") |
Gloves |
Multi-Tool (ie: "Leatherman" type) |
Rigging
|
| Good Quality Rope (50ft+) |
Safety Harness |
|
|
|
|
Job Specific Recomendations:
BASIC THEATRICAL TOOL PACKAGE:
(for calls at the theaters and for carpenter and electric calls in the convention center and hotels.)
|
AUDIO VISUAL JOBS:
|
|
Tool Belt - For tools and basic hardware you will need on the job
Tape Measure - 25 foot minimum
Straight Claw Hammer - 16 oz.
Screw Drivers - a 4 in 1 is ok
Battery Operated Screw Gun - 9.6 volt minimum
Crescent Wrench - 8 in.
Ratchet Wrench - 3/8 “ drive, 3/8", 7/16", 1/2", 9/16" deep sockets
Channel Locks - 10"
Pliers - Slip Joint, 2 position
Wire Cutters - end cutters or diagonal cutters
Pocket Knife - big enough to cut sash cord, small enough to carry with you at all times
Flashlight - Small and Powerful
Safety Glasses
Gloves
Pen and Pencil
Black Sharpie
|
Maglight Flashlight, holder
4 in one screw driver
8" crescent wrench
Leatherman or other multi-purpose tool
Jewelers Screw drivers - (phillips and flat)
Needle Nose Pliers
Assorted Nut Drivers
Pocket Knife
Circuit Tester
Board Tape or Masking tape
Electrical Tape
Sharpie or other fine point permanent marker
Gloves
Pen and small Pad of Paper
Fanny Pack to hold tools
Binder to hold Payroll sheets, Note Pads, etc.
|
|
CONSTRUCTION SHOPS:
|
RIGGING:
|
Tool Belt - For tools and basic hardware you will need on the jobs
Tape Measure - 25 foot minimum
Architect’s scale rule
Straight Claw Hammer - 16 oz.
Nail Sets
Center Punch
Screw Drivers - a 4 in 1 is ok
Battery Operated Screw Gun - 9.6 volt minimum
Combination Square or Speed Square, and Framing Square
Hand Saw(s) - cross cut saw at least
Crescent Wrench - 8 in. And 10 in.
Ratchet Wrench - 3/8 “ drive, 3/8", 7/16", 1/2", 9/16" deep sockets (complete set preferred)
Channel Locks - 10"
Pliers - Slip Joint, 2 position
Wire Cutters - end cutters and diagonal cutters
Pocket Knife - big enough to cut sash cord, small enough to carry with you at all times
Utility Knife and blades
Chalk Line, Dry Line, line level
Flashlight - Small and Powerful
Carpenter’s compass, bevel gauge, angle dividers
Block Plane, Sureform, assorted files and rasps
1" wood chisel (at least)
3" wrecking chisel
Safety Glasses
Ear protection
Gloves
Pen and Pencil
Black Sharpie
ADDITIONAL TOOLS FOR WELDERS:
Welding Hood
Leather Jacket
Gloves
Magnetic Torpedo Level
12" Crescent Wrench
|
*Rope – 5/8”
*Full Body Harness – Rated (Ansi Z395.1)
*Shock Absorber
*Lanyard / “Y” Lanyard (Sports Arena)
*Auto Lock Steel Carabiners (minimum 2)
*Multi Loop 5ft
*CMC Rescue Sheave
100ft Cloth Tape Measure
30ft Steel Tape Measure
Channel Locks 8”
Crescent Wrench 8” (wide mouth, must open to 1 1/8”)
4 in 1 Screw Driver
Volt Meter
Sidewalk chalk
Ratcheting Box Wrench ¾ x 7/8
Socket Wrench 3/8 Drive: 11/16, 9/16, 3/8 Deep Sockets
Socket Wrench 1/2 Drive: 15/16, 7/8, 3/4 Deep Sockets
|
Downloadable Software Tools
|
|
|
|
|
|
|
|
|
| S |
M |
T |
W |
T |
F |
S |
|
|
|
|
1
|
2
|
3
|
4
|
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
|
|
|
| Organize
Today |
Learn
more about organizing your workplace!
Click Here |
|
|
|
|
|
|
|
|
|
| Action
Center |
IATSE Distric 2
District 2 of the I.A.T.S.E. represents Local IA Unions in Arizona, California, Hawaii and Nevada - reflecting approximately 37,000 members |
|
Local Jobs First
Support the effort to make sure the Gaylord Convention Center in Chula Vista uses local union labor to ensure a safe and professional environment that supports the people of San Diego county. |
|
|
|
San Diego AFL-CIO
The San Diego-Imperial Counties Labor Council is a central body affiliate of the AFL-CIO. |
|
|
|
Good Jobs First
Good Jobs First is a national policy resource center promoting corporate and government accountability in economic development and smart growth for working families. |
|
|
|
|
|
|
|
.gif)
